There are accumulators and inverters in each type of wind turbine, and 2000 w wind turbines are no exception, and there are strict requirements on the setting of these two devices. For example, the storage battery must be placed in a dry, constant room temperature, and the battery should be well ventilated.
The 2000 w wind generator battery is determined to be connected in parallel and in series and in total quantity, and then it is designed to install the accumulator and inverter. Connect the battery in series, the anode of the first battery is connected to the negative electrode of the second battery, and then the required voltage is added, and all the wiring head bits are coated with grease or other anti-corrosion materials.
The grounding line drawn from the 2000 w wind generator must be grounded near the base, the anode and inverter of the ignition battery, and the negative terminal and inverter of the zero connection battery. In order to ensure safety and maintenance, it is necessary to follow the standard equipment switch and fuse.
In this process, it is important to confirm that the output voltage of the purchased 2000 w wind generator, the voltage of the battery unit and the input voltage of the inverter are equal, and the connection should not be wrong. Connect the battery and the controller first, then connect the battery and inverter, and then connect the output line of the fan to the input terminal of the controller.
Carefully speaking 2000 w wind turbines working environment may be very bad, also may encounter all sorts of complex weather conditions, therefore need regular inspection and maintenance, in order to maintain the system normal operation. The key is to check whether the steel cable of the tower is too loose or too tight, and adjust in time, especially after the initial installation and strong wind.
At the same time, it is necessary to check whether the connection cable of each component of the 2000 w wind generator is damaged, and whether the connection points are loose and corroded to ensure electrical safety. In addition, the battery should keep the electrolyte height. If there is any reduction, please refer to the battery instruction manual. Especially before the storm or other inclement weather, it is recommended to put in the tower to avoid unexpected loss.http://www.titanwindturbine.com/